Printronix P8000 Series Administrator's Manual page 203

CAUTION Once PMD is disabled, paper motion is not monitored. If a paper jam occurs, the
printer ignores the condition and continues to print, possibly causing damage to
the printer.
Auto Locking
•
Disable (factory default). The ENTER key must be locked manually.
•
Enable. The printer automatically locks the ENTER key five minutes after the last front panel key
press.
Main File System
The Main File System refers to the flash resident on the P8000 controller.
•
Overwrite Files. Allows you to prevent flash files from being overwritten by disabling the overwrite
function.
•
View File List. Displays the list of flash files in the main file system. Press the ENTER key to go into
the submenu. Then press the UP or DOWN keys to view the different file names and size.
•
Delete Files. Displays the list of flash files in the main file system. Press the LEFT or RIGHT keys to
select the desired file to delete. Pressing the ENTER key deletes the file displayed on the control
panel.
•
Flash Avail. The amount of flash available for the user to save or download files into the main file
system.
•
Flash Reclaimable. The amount of flash marked deleted, but cannot be used until the
Optimize&Reboot operation is performed.
•
Copy To SD. If the SD card is inserted, the section will allow the user to copy selected files from the
main file system to the SD card (root directory).
•
Optimize&Reboot. Reclaims flash space from deleted flash files within the main file system. After
pressing ENTER, wait for the printer to reboot.
NOTE: When the Optimize&Reboot option is executed, the message, "Optimizing Flash Files" does not
display before printer rebooting takes place.
•
Print File List. Prints a summary of the flash files stored in flash memory and several statistics on
Main File System usage.
IMPORTANT Do not turn the printer off until it has completely rebooted and is either back online
or offline.
SD File System
The SD File System menu appears if an SD card is inserted in the printer before power-up. The SD File
System applies only the SD card's root directory.
IMPORTANT If you remove or insert the SD card after the printer is powered on, an error will
occur.
•
Overwrite Files. Prevents SD files from being overwritten by disabling the overwrite function.
•
View SD Files. Displays the list of files on the SD card (root directory). Press the ENTER key to go
into the submenu, then press the UP or DOWN keys to view the different SD file names and size.
•
Delete SD Files. Displays the list of SD files on the SD card (root directory). Press the LEFT or
RIGHT keys to select the desired file to delete. Pressing the ENTER key deletes the file displayed on
the control panel.
•
SD Flash Avail. The amount of SD memory available for the user to save or download files into the
SD card.
203