Postscript/Pdf Interpreter - Printronix P8000 Series Administrator's Manual

Postscript/PDF Interpreter

The Postscript/PDF data is handled by Ghostscript by Artifex, an interpreter compatible with the following:
•
Portable Document Format ("PDF") 1.0, 1.1, 1.2, 1.4, 1.5, and 1.6 as defined in the Portable
Document Format Reference Manual, distributed by Adobe Systems Incorporated.
•
PostScript (TM) Language Level 3, as defined in the PostScript Language Reference Third Edition
(ISBN 0-201-37922-8), published by Addison- Wesley in mid-1999.
Ghostscript includes a set of 35 scalable outline fonts in PostScript Type 1 format, compatible in
appearance and metrics with the fonts commonly distributed under the following names:
•
Bookman (demi, demi italic, light, light italic)
•
Courier ((plain, oblique, bold, bold oblique)
•
Avant Garde (book, book oblique, demi, demi oblique)
•
Helvetica (plain, oblique, bold, bld oblique narrow, narrow oblique, narrow bold, narrow bold oblique)
•
Palatino (roman, italic, bold, bold italic)
•
New Century Schoolbook (roman, italic, bold, bold italic)
•
Times (roman, italic, bold, bold italic)
•
Symbol
•
Zapf Chancery (medium italic)
•
Zapf Dingbats
The Ghostscript version used in the P8000 is 8.71.
Resolution
This parameter defines the default print resolution. This selection is used when either the print resolution
is not defined by the data stream or if the print resolution defined by the data stream is not supported.
The following resolutions are available on OpenPrint P8000 Standard products:
•
120x144 DPI (factory default)
•
90x96 DPI
The following resolutions are available on OpenPrint P8000 HD products:
•
180x180 DPI (factory default)
•
180x90 DPI
•
90x180 DPI
186