Printronix P8000 Series Administrator's Manual page 50

can be stored and loaded later for future use. If you do not save your configuration using the Auto Save,
or this option, all of your parameter changes will be erased when you power off the printer.
Once you have saved a custom configuration using this option, it will not be lost if you power off the
printer. You can load a configuration for a specific print job (see Load Config. on page 76). You can also
modify and resave it. You may want to print your configurations (see Print Config. on page 76) and store
them in a safe place, such as inside the printer cabinet. If the Protect Configs. parameter is enabled and
you try to resave an existing configuration, the new configuration will not be saved until the existing
configuration has been deleted (see Delete Config. on page 76).
NOTE: Once you change active emulations, any changes to the previously selected emulation will be
gone unless they have been saved.
Example 1
This example shows how to save a configuration as a numbered configuration, then later print it.
Step
Make sure the printer is on.
1.
2.
3.
4.
5.
50
Press
ONLINE
ENTER
+
UNTIL
LCD
Allows you to make configuration
changes.
Notes