Printronix P8000 Series Administrator's Manual page 281

Table 24 LCD Message Troubleshooting Table (H-Series)
Displayed Message
B30 STATUS:
INITIALIZING...
B50 STATUS:
PANEL CODE BAD
B51 STATUS:
XX% LOADING...
BAD NVM CALL 1
BAD NVM CALL 2
BAD NVM CALL 3
BAD NVM CALL 4
BAD NVM CALL A
Bxx ERROR: NO
DOWNLOADER
FOUND
CATASTROPHIC
ERROR
CLEARING
PROGRAM FROM
FLASH
D50 Status
UPGRADING PANEL
D51 Status %XX
Programming...
Can User
Explanation
Correct?
N/A Status message: the printer
is running its initialization
routines after startup and
successful memory tests.
No Saved version of Panel
Code is corrupt.
No Status message: printer
boot-up routines are loading
printer system software into
flash memory and SDRAM.
Yes Printer firmware code error
with the Novram module that
stores configurations and
statistics.
No No Downloader was found
while downloading a file.
No Fatal error in printer.
No Status message: emulation
software successfully loaded
into printer RAM and the
checksum matched. The old
program is now being
deleted from flash memory.
No Status message: The printer
is upgrading the panel,
where %XX represents the
percentage completed.
No Status message: The printer
is loading firmware, where
%XX represents the
percentage completed.
Solution
No action is required.
Reload released Firmware.
No action required.
1. Cycle power. Run the print
job again. If the message
appears, load the latest
emulation software.
2.
Cycle power. Run the print
job again. If the message
appears again, record the
exact display message and
follow the instructions on
page 252, Diagnostics for
EXX, BAD NVM, or ILL NVM
Errors, and contact your
authorized service
1
representative.
Reload released Firmware.
Contact your authorized
customer service
1
representative.
No action is required.
No action is required.
No action is required.
281