System LED Behaviors With Assigned Meanings (Continued) (Continued)
TABLE 2-2
Color
Behavior
Slow blink
Steady on
Green
Off
Standby blink
Steady on
Slow blink
Bezel Server Status Indicators
FIGURE 2-1
information about the server status indicators.
Definition
1-Hz repeating
sequence, equal
intervals On and
Off.
Steady state
Steady state
Repeating
sequence
consisting of a
brief (0.1 sec.) on
flash followed by
a long off period
(2.9 sec.)
Steady state
shows the location of the bezel indicators, and
Chapter 2
Description
This indicator signals new fault conditions. Service is
required.
Example: the Service Required LED.
The amber indicator stays on until the service action is
completed and the system returns to normal function.
The system is running at a minimum level and is ready
to be quickly revived to full function.
Example: the System Activity LED.
Status normal. System or component functioning with
no service actions required.
A transitory (temporary) event is taking place for
which direct proportional feedback is not needed or is
not feasible.
Managing RAS Features and System Firmware
provides
TABLE 2-3
33