To Delete A Hardware Raid Volume - Sun Oracle Netra T5440 Administration Manual

5. Write the new label to the disk using the label command.
format> label
Ready to label disk, continue? yes
6. Verify that the new label has been written by printing the disk list using the
disk command.
format> disk
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN72G cyl 14084 alt 2 hd 24 sec 424>
/pci@0/pci@0/pci@2/scsi@0/sd@0,0
1. c0t1d0 <SUN72G cyl 14084 alt 2 hd 24 sec 424>
/pci@0/pci@0/pci@2/scsi@0/sd@1,0
2. c0t2d0 <LSILOGIC-LogicalVolume-3000 cyl 69866 alt 2 hd
16 sec 128>
/pci@0/pci@0/pci@2/scsi@0/sd@2,0
Specify disk (enter its number)[2]:
Note that c0t2d0 now has a type indicating it is an LSILOGIC-LogicalVolume.
7. Exit the format utility.
The volume can now be used in the Solaris OS.
Note – The logical device names might appear differently on your system,
depending on the number and type of add-on disk controllers installed.

▼ To Delete a Hardware RAID Volume

1. Verify which hard drive corresponds with which logical device name and
physical device name.
See "Physical Disk Slot Numbers, Physical Device Names, and Logical Device
Names for Non-RAID Disks" on page 54.
Chapter 3 Managing Disk Volumes 63