To Display Current Valid System Faults - Sun Oracle Netra T5440 Administration Manual

▼ To Display Current Valid System Faults

●
Type:
-> show /SP/faultmgmt
This command displays the fault ID, the faulted FRU device, and the fault
message to standard output. The show /SP/faultmgmt command also displays
POST results.
For example:
-> show /SP/faultmgmt
/SP/faultmgmt
->
For more information about the show /SP/faultmgmt command, refer to the
ILOM guide and the ILOM supplement for your server.
▼ To Clear a Fault
●
Type:
-> set /SYS/component clear_fault_action=true
Setting clear_fault_action to true clears the fault at the component and all
levels below it in the /SYS tree.
48 Sun Netra T5440 Server Administration Guide • April 2010
Targets:
0 (/SYS/PS1)
Properties:
Commands:
cd
show