Table of Contents
Advertisement
▼ To Restore OpenBoot Configuration Defaults
1. Log in to the ILOM service processor.
2. Type the following commands:
-> set /HOST/bootmode state=reset_nvram
-> set /HOST/bootmode script="setenv auto-boot? false"
->
Note – If you do not issue the stop /SYS and start /SYS commands or the
reset /SYS command within 10 minutes, the host server ignores the
set/HOST/bootmode commands.
You can issue the show /HOST/bootmode command without arguments to
display the current setting.
-> show /HOST/bootmode
/HOST/bootmode
Targets:
Properties:
config = (none)
expires = Tue Jan 19 03:14:07 2038
script = (none)
state = normal
3. To reset the system, type the following commands:
-> reset /SYS
Are you sure you want to reset /SYS (y/n)?
->
4. To view console output as the system boots with default OpenBoot
configuration variables, switch to console mode.
-> set /SP/network pendingipdiscovery=dhcp
Set 'pendingipdiscovery' to 'dhcp'
-> set /SP/network commitpending=true
Set 'commitpending' to 'true'
->
Chapter 2
Managing RAS Features and System Firmware
y
39
Advertisement
Table of Contents
