For More Information; System Console Openboot Configuration Variable Settings - Sun Oracle Netra T5440 Administration Manual

Access Method
ILOM commands
Manual system reset
Graceful reset of the
control domain using the
ILOM reset command

For More Information

For more information about the OpenBoot firmware, refer to the OpenBoot 4.x
Command Reference Manual. An online version of the manual is available at:
(http://docs.sun.com)
System Console OpenBoot
Configuration Variable Settings
On the Sun Netra T5440 server, the system console is directed to the serial
management and network management ports (SER MGT and NET MGT) by default.
However, you can redirect the system console to a local graphics monitor, keyboard,
and mouse. You can also redirect the system console back to the serial management
and network management ports.
26 Sun Netra T5440 Server Administration Guide • April 2010
What to Do
From the -> prompt, type the set /HOST send_break_action=break
command. Then issue the start /SP/console command, provided the operating
system software is not running and the server is already under OpenBoot firmware
control.
From the -> prompt, type:
-> set /HOST/bootmode script="setenv auto-boot? false"
Press Enter.
then type:
-> reset /SYS
From the -> prompt in the control domain, type:
-> set /HOST/domain/control auto-boot=disable
-> reset /HOST/domain/control