2. At the password prompt, enter the password and press Return to get to the ->
prompt.
Please Enter password:
->
Note – The default user is root and the password is changeme. For more
information, refer to the Sun Netra T5440 Server Installation Guide, the Integrated
Lights Out Management User's Guide, and the Integrated Lights Out Management 2.0
Supplement for the Sun Netra T5440 Server.
Caution – To provide optimum system security, change the default system
password during initial setup.
Using the ILOM service processor, you can monitor the system, turn the Locator
LED on and off, or perform maintenance tasks on the ILOM service processor
itself. For more information, refer to the ILOM User's Guide and the ILOM
supplement for your server.
▼ To View System Fault Information
1. Log in to the ILOM service processor.
2. Use the following command to display a list of faults currently on the system.
show /SP/faultmgmt
Note – You do not need ILOM administrator permissions to use this command.
Status Indicators
The system has LED indicators associated with the server itself and with various
components. The server status indicators are located on the bezel and repeated on
the back panel. The components with LED indicators to convey status are the dry
contact alarm card, power supply units, Ethernet port, and hard drives.
The topics in this section include:
"Interpreting System LEDs" on page 32
■
Chapter 2
Managing RAS Features and System Firmware
31