Table of Contents
Advertisement
Specify disk (enter its number): 2
selecting c0t2d0
[disk formatted]
FORMAT MENU:
3. Type the type command at the format> prompt, then select 0 (zero) to auto
configure the volume.
For example:
format> type
AVAILABLE DRIVE TYPES:
Specify disk type (enter its number)[3]: 0
c0t2d0: configured with capacity of 68.23GB
<LSILOGIC-LogicalVolume-3000 cyl 69866 alt 2 hd 16 sec 128>
selecting c0t2d0
[disk formatted]
4. Use the partition command to partition, or slice, the volume according to
your desired configuration.
See the format(1M) man page for additional details.
62
Sun Netra T5440 Server Administration Guide • April 2010
disk
- select a disk
type
- select (define) a disk type
partition
- select (define) a partition table
current
- describe the current disk
format
- format and analyze the disk
fdisk
- run the fdisk program
repair
- repair a defective sector
label
- write label to the disk
analyze
- surface analysis
defect
- defect list management
backup
- search for backup labels
verify
- read and display labels
save
- save new disk/partition definitions
inquiry
- show vendor, product and revision
volname
- set 8-character volume name
!<cmd>
- execute <cmd>, then return
quit
0. Auto configure
1. DEFAULT
2. SUN72G
3. SUN72G
4. other
Advertisement
Table of Contents
