Table of Contents
Advertisement
2. Determine the name of the RAID volume, type:
# raidctl
RAID
Volume
------------------------------------------------------
c0t0d0
In this example, the RAID volume is c0t1d0.
Note – The logical device names might appear differently on your system,
depending on the number and type of add-on disk controllers installed.
3. To delete the volume, type the following command:
# raidctl -d mirrored-volume
For example:
# raidctl -d c0t0d0
RAID Volume 'c0t0d0' deleted
In the event that the RAID volume is an IS volume, the deletion of the RAID
volume is interactive, for example:
# raidctl -d c0t0d0
Deleting volume c0t0d0 will destroy all data it contains, proceed
(yes/no)? yes
Volume 'c0t0d0' deleted.
#
The deletion of an IS volume results in the loss of all data that it contains. As an
alternative, you can use the –f option to force the deletion if you are sure that
you no longer need the IS volume, or the data it contains. For example:
# raidctl -f -d c0t0d0
Volume 'c0t0d0' deleted.
#
64
Sun Netra T5440 Server Administration Guide • April 2010
Volume
RAID
Type
Status
IM
OK
RAID
Disk
Disk
Status
c0t0d0
OK
c0t1d0
OK
Advertisement
Table of Contents
