Configuring The Debounce Timer; Configuring The Description Parameter - Cisco nexus 5000 series Cli Configuration Manual

Chapter 1 Configuring Ethernet Interfaces
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

Configuring the Debounce Timer

You can enable the debounce timer for Ethernet ports by specifying a debounce time (in milliseconds)
or disable the timer by specifying a debounce time of 0.
You can show the debounce times for all of the Ethernet ports by using the show interface debounce
command.
To enable or disable the debounce timer, perform this task:
Command
Step 1
switch# configure terminal
Step 2
switch(config)# interface type slot/port
Step 3
switch(config-if)# link debounce time
milliseconds
This example shows how to enable the debounce timer and set the debounce time to 1000 milliseconds
for an Ethernet interface:
switch# configure terminal
switch(config)# interface ethernet 1/4
switch(config-if)# link debounce time 1000
This example shows how to disable the debounce timer for an Ethernet interface:
switch# configure terminal
switch(config)# interface ethernet 1/4
switch(config-if)# link debounce time 0
This command can only be applied to a physical Ethernet interface.

Configuring the Description Parameter

To provide textual interface descriptions for the Ethernet ports, perform this task:
Command
Step 1
switch# configure terminal
Step 2
switch(config)# interface type slot/port
Step 3
switch(config-if)# description test
This example shows how to set the interface description to "Server 3 Interface".
switch# configure terminal
switch(config)# interface ethernet 1/3
switch(config-if)# description Server 3 Interface
OL-16597-01
Purpose
Enters configuration mode.
Enters interface configuration mode for the specified
interface.
Enables the debounce timer for the amount of time (1
to 5000 milliseconds) specified.
Disables the debounce timer if you specify 0
milliseconds.
Purpose
Enters configuration mode.
Enters interface configuration mode for the specified
interface.
Specifies the description for the interface.
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
Configuring Ethernet Interfaces
1-7