Cisco nexus 5000 series Cli Configuration Manual page 434

Information About Fibre Channel Domains
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
Figure 1-1
7.0.1
7.0.2
7.0.0
Note Domain IDs and VSAN values used in all procedures are only provided as examples. Be sure to use IDs
and values that apply to your configuration.
This section describes the fcdomain feature and includes the following topics:
About Domain Restart, page 1-3
•
Restarting a Domain, page 1-3
•
About Domain Manager Fast Restart, page 1-4
•
• Enabling Domain Manager Fast Restart, page 1-4
• About Switch Priority, page 1-4
• Configuring Switch Priority, page 1-5
About fcdomain Initiation, page 1-5
•
Disabling or Reenabling fcdomains, page 1-5
•
Configuring Fabric Names, page 1-5
•
About Incoming RCFs, page 1-5
•
Rejecting Incoming RCFs, page 1-6
•
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
1-2
Sample fcdomain Configuration
Switch 7 (subordinate)
Local WWN
20:02:ab:ba:cd:dc:f4:00
Configured domain ID
0 (zero) preferred
Runtime domain ID = 7
Configured priority = 128
Runtime priority = 128
Runtime fabric name
20:01:ab:ba:cd:cd:dc:f4
Chapter 1 Configuring Domain Parameters
Switch 2 (principal)
Local WWN
20:01:ab:ba:cd:dc:f4:00
Configured domain ID
0 (zero) preferred
Runtime domain ID = 2
Configured priority = 128
Runtime priority = 2
Runtime fabric name
20:01:ab:ba:cd:cd:dc:f4
Local WWN
20:03:ab:ba:cd:dc:f4:00
Configured domain ID
0 (zero) preferred
Runtime domain ID = 102
Configured priority = 128
Runtime priority = 128
Runtime fabric name
20:01:ab:ba:cd:cd:dc:f4
Switch 99 (subordinate)
99.0.1
99.0.2
99.0.3
99.1.2
99.1.1
OL-16597-01