Cisco nexus 5000 series Cli Configuration Manual page 475

Chapter 1 Configuring SAN Port Channels
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
Configuring SAN Port Channels
SAN port channels are created with default values. You can change the default configuration just as any
other physical interface.
Figure 1-5
Figure 1-5
Channel Group 10
Switch A
Figure 1-6
3, 4 sequence, links 3 and 4 will be operationally down as the fabric is misconfigured.
OL-16597-01
provides examples of valid SAN port channel configurations.
Valid SAN Port Channel Configurations
Channel Group 20
1 1
2 2
Switch B
3 3
4 4
shows examples of invalid configurations. Assuming that the links are brought up in the 1, 2,
Channel Group 10
Switch A
Channel Group 1
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
Configuring SAN Port Channels
Channel Group 20
1 1
2 2
Switch B
3 3
4 4
Channel Group 2
1-5