Cisco nexus 5000 series Cli Configuration Manual page 593

Chapter 1 Configuring FC-SP and DHCHAP
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
Display the DHCHAP configuration in the Fibre Channel interface,
Step 7
switch# show fcsp interface fc2/4
fc2/4
Repeat these steps on the connecting MDS 9509 switch.
Step 8
MDS-9509# show wwn switch
Switch WWN is 20:00:00:05:30:00:38:5e
MDS-9509(config)# fcsp enable
MDS-9509(config)# fcsp dhchap password rtp9509
MDS-9509(config)# fcsp dhchap devicename 20:00:00:05:30:00:54:de password rtp9216
MDS-9509(config)# interface fc 4/5
MDS-9509(config-if)# fcsp on
MDS-9509# show fcsp dhchap database
DHCHAP Local Password:
Other Devices' Passwords:
MDS-9509# show fcsp interface fc2/4
Fc2/4
You have now enabled and configured DHCHAP authentication for the sample setup in
Default Settings
Table 1-2
Table 1-2
Parameters
DHCHAP feature
DHCHAP hash algorithm
DHCHAP authentication mode
DHCHAP group default priority
exchange order
DHCHAP timeout value
OL-16597-01
fcsp authentication mode:SEC_MODE_ON
Status:Successfully authenticated
Non-device specific password:*******
Password for device with WWN:20:00:00:05:30:00:54:de is *******
fcsp authentication mode:SEC_MODE_ON
Status:Successfully authenticated
lists the default settings for all fabric security features in any switch.
Default Fabric Security Settings
Default
Disabled
A priority list of MD5 followed by SHA-1 for DHCHAP
authentication
Auto-passive
0, 4, 1, 2, and 3, respectively
30 seconds
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
Default Settings
Figure 1-2.
1-11