Verifying Ip Acl Configurations; Displaying And Clearing Ip Acl Statistics; Configuring Mac Acls - Cisco nexus 5000 series Cli Configuration Manual

Chapter 1 Configuring ACLs
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

Verifying IP ACL Configurations

To display IP ACL configuration information, perform one of the following tasks:
Command
show running-config
show ip access-lists
show running-config interface
For detailed information about the fields in the output from these commands, refer to the Cisco Nexus
5000 Series Command Reference.

Displaying and Clearing IP ACL Statistics

Use the show ip access-lists command to display statistics about an IP ACL, including the number of
packets that have matched each rule. For detailed information about the fields in the output from this
command, refer to the Cisco Nexus 5000 Series Command Reference.
The mac access-list is applicable to non-IPv4 and non-IPv6 traffic only.
Note
To display or clear VACL statistics, perform one of the following tasks:
Command
show ip access-lists
clear ip access-list counters
For detailed information about these commands, refer to the Cisco Nexus 5000 Series Command
Reference.

Configuring MAC ACLs

This section includes the following topics:
•
•
OL-16597-01
Creating a MAC ACL, page 1-10
Changing a MAC ACL, page 1-10
Purpose
Displays ACL configuration, including IP ACL
configuration and interfaces that IP ACLs are
applied to.
Displays the IP ACL configuration.
Displays the configuration of an interface to
which you have applied an ACL.
Purpose
Displays IP ACL configuration. If the IP ACL
includes the statistics command, then the show ip
access-lists command output includes the number
of packets that have matched each rule.
Clears statistics for all IP ACLs or for a specific
IP ACL.
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
Configuring MAC ACLs
1-9