Cisco nexus 5000 series Cli Configuration Manual page 53

Chapter 1 Configuring the Switch
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
Ensure that the required space is available in the bootflash: directory for the image file(s) to be copied.
Step 7
switch# dir bootflash:
21581824
21573632
20062208
77139580
75270834
76924383
Usage for bootflash://sup-local
855547904 bytes used
6942613504 bytes free
7798161408 bytes total
Tip
If you need more space on the active supervisor module bootflash, delete unnecessary files to make space
Step 8
available.
switch# delete bootflash:n5000-uk9-kickstart.4.0.0.N1.1.445.bin
switch# delete bootflash:n5000-uk9.4.0.0.N1.1.445.bin
Copy the kickstart and system images to the supervisor module bootflash using a transfer protocol. You
Step 9
can use ftp:, tftp:, scp:, or sftp:. The examples in this procedure use scp:.
switch# copy scp://user@scpserver.cisco.com//downloads/n5000-uk9-kickstart.4.0.0.N1.2.bin
bootflash:n5000-uk9-kickstart.4.0.0.N1.2.bin
switch# copy scp://user@scpserver.cisco.com//downloads/n5000-uk9.4.0.0.N1.2.bin
bootflash:n5000-uk9.4.0.0.N1.2.bin
Install the new images, specifying the new image names that you downloaded in step 9.
Step 10
switch(config)# install all kickstart bootflash:n5000-uk9-kickstart.4.0.0.N1.2.bin system
bootflash:n5000-uk9.4.0.0.N1.2.bin
The install command performs the following actions:
• performs compatibility checks (equivalent to the show incompatibility command) for the images
that you have specified. If there are compatibility issues, an error message is displayed and the
installation does not proceed.
Displays the compatibility check results and displays whether the installation is disruptive.
•
OL-16597-01
5910 Jun 17 14:48:28 2008
453 Jan 01 00:12:13 2005
453 Jan 01 20:50:55 2005
453 Jan 01 20:58:49 2005
215 Jan 01 00:13:50 2005
221 Jan 01 04:25:43 2005
219 Jan 01 04:26:14 2005
216 Jan 01 00:21:48 2005
49152 Jul 28 09:42:51 2008
Jul 08 10:11:14 2008
Jul 28 09:38:33 2008
Jul 28 09:43:05 2008
Jul 08 10:10:45 2008
Jul 28 09:38:33 2008
Jul 28 09:44:01 2008
4096 Jan 01 00:07:37 2005
3697 Apr 30 14:53:07 2008
4096 Aug 08 12:49:09 2008
0 Jan 03 04:19:13 2005
782893 Jan 21 16:56:14 2005
126927 Jan 21 16:55:45 2005
We recommend that you keep the kickstart and system image files for at least one previous
software release to use if the new image files do not load successfully.
config0617
ent-fm.lic
ent-fm123.lic
ent-fm123456.lic
enterprise.lic
eth-mod.lic
eth-port.lic
fc-feature.lic
lost+found/
n5000-uk9-kickstart.4.0.0.N1.1.445.bin
n5000-uk9-kickstart.4.0.0.N1.1.47.bin
n5000-uk9-kickstart.4.0.0.N1.2.467.bin
n5000-uk9.4.0.0.N1.1.445.bin
n5000-uk9.4.0.0.N1.1.47.bin
n5000-uk9.4.0.0.N1.2.467.bin
routing-sw/
startup-config
test/
thttpd_output
zone-scale-config.out
zoneset-scale-config.out
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
Upgrading the Switch
1-5