License Installation - Cisco nexus 5000 series Cli Configuration Manual

Chapter 1 Managing Licenses
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
Table 1-1
Feature License
Storage Services Package
N5020-SS
Advanced Services Package
N5000-AS

License Installation

You can either obtain a factory-installed license (only applies to new switch orders) or perform a manual
license installation of the license (applies to existing switches in your network).
This section includes the following topics:
•
•
Obtaining a Factory-Installed License
You can obtain factory-installed licenses for a new Cisco Nexus 5000 Series switch.
To obtain a factory-installed license, perform this task:
Contact your reseller or Cisco representative and request this service.
Step 1
Note
Your switch is shipped with the required licenses installed in the system. The proof of purchase
document is sent along with the switch.
Obtain the host ID from the proof of purchase document for future use.
Step 2
You can now start to use the switch and the licensed features.
OL-16597-01
Feature-Based Licenses (continued)
Obtaining a Factory-Installed License, page 1-3
Performing a Manual Installation, page 1-4
If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you
purchased support directly from Cisco Systems, contact Cisco Technical Support at this URL:
http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml
Features
N5020-SS includes the following services for one
•
NX5020 system:
Native Fibre Channel
•
FCoE
•
NPV
•
FC Port Security
•
Fabric Binding
•
This package will be available in a future release.
•
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
License Installation
1-3