Assigning Snmp Switch Contact And Location Information; Verifying Snmp Configuration - Cisco nexus 5000 series Cli Configuration Manual

Verifying SNMP Configuration

S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

Assigning SNMP Switch Contact and Location Information

You can assign the switch contact information, which is limited to 32 characters (without spaces) and
the switch location. To assign the information, perform this task:
Command
Step 1
switch# configuration terminal
Step 2
switch(config)# snmp-server contact name
Step 3
switch(config)# snmp-server location
name
Step 4
switch(config-callhome)# show snmp
Step 5
switch(config)# copy running-config
startup-config
Verifying SNMP Configuration
To display SNMP configuration information, perform one of the following tasks:
Command
show snmp
show snmp community
show snmp engineID
show snmp group
show snmp sessions
show snmp trap
show snmp user
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
1-12
Purpose
Enters configuration mode.
Configures sysContact, the SNMP contact name.
Configures sysLocation, the SNMP location.
(Optional) Displays information about one or more
destination profiles.
(Optional) Saves this configuration change.
Purpose
Displays the SNMP status.
Displays the SNMP community strings.
Displays the SNMP engineID.
Displays SNMP roles.
Displays SNMP sessions.
Displays the SNMP notifications enabled or
disabled.
Displays SNMPv3 users.
Chapter 1 Configuring SNMP
OL-16597-01