Cisco nexus 5000 series Cli Configuration Manual page 308

Hide thumbs Also See for nexus 5000 series:
Table of Contents

Advertisement

Default Settings
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
20:00:00:0e:d7:00:3c:9e
Total number of entries = 2
The show cfs peers name command displays all the peers for which a particular application is registered
with CFS. The command output shows all the peers for the physical scope or for each of the valid VSANs
on the switch, depending on the application scope. For physical scope, the switch WWNs for all the peers
are indicated. The local switch is indicated as Local.
switch# show cfs peers name ntp
Scope
-------------------------------------------------
Switch WWN
-------------------------------------------------
20:00:00:44:22:00:4a:9e
20:00:00:05:30:01:1b:c2
The following example show cfs peers name command output displays all the application peers (all
switches in which that application is registered). The local switch is indicated as Local.
switch# show cfs peers name port-security
Scope
-----------------------------------------------------------
Domain
-----------------------------------------------------------
124
98
Total number of entries = 2
Scope
-----------------------------------------------------------
Domain
-----------------------------------------------------------
224
151
Total number of entries = 2
Default Settings
Table 1-1
Table 1-1
Parameters
CFS distribution on the switch
Database changes
Application distribution
Commit
CFS over IP
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
1-16
10.76.100.169
: Physical
IP Address
172.22.92.27
172.22.92.215
: Logical [VSAN 1]
Switch WWN
20:00:00:44:22:00:4a:9e
20:00:00:05:30:01:1b:c2
: Logical [VSAN 3]
Switch WWN
20:00:00:44:22:00:4a:9e
20:00:00:05:30:01:1b:c2
lists the default settings for CFS configurations.
Default CFS Parameters
Default
Enabled.
Implicitly enabled with the first configuration change.
Differs based on application.
Explicit configuration is required.
Disabled.
[Local]
IP Address
172.22.92.27
[Local]
172.22.92.215
IP Address
172.22.92.27
[Local]
172.22.92.215
Chapter 1
Using Cisco Fabric Services
OL-16597-01

Advertisement

Table of Contents
loading

Table of Contents