Configuring User Accounts - Cisco nexus 5000 series Cli Configuration Manual

Guidelines and Limitations
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
Guidelines and Limitations
User account and RBAC have the following configuration guidelines and limitations:
•
•
If you are familiar with the Cisco IOS CLI, be aware that the Cisco NX-OS commands for this feature
Note
might differ from the Cisco IOS commands that you would use.
Note

Configuring User Accounts

You can create a maximum of 256 user accounts on a Nexus 5000 Series switch. User accounts have the
following attributes:
•
•
•
•
User accounts can have a maximum of 64 user roles. For more information on user roles, see the
"Configuring RBAC" section on page
Changes to user account attributes do not take effect until the user logs in and creates a new session.
Note
To configure a user account, perform this task:
Command
Step 1
switch(config)# show role
Step 2
switch# configure terminal
switch(config)#
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
1-4
You can add up to 256 rules to a user role.
You can assign a maximum of 64 user roles to a user account.
A user account must have at least one user role.
Username
Password
Expiry date
User roles
Chapter 1
1-5.
Purpose
(Optional) Displays the user roles available. You can
configure other user roles, if necessary (see the
"Creating User Roles and Rules" section on
page 1-5)
Enters global configuration mode.
Configuring User Accounts and RBAC
OL-16597-01