Cisco nexus 5000 series Cli Configuration Manual page 262

Displaying TACACS+ Statistics
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
Command
Step 3
switch(config)# exit
Step 4
switch# copy running-config
startup-config
Displaying TACACS+ Statistics
To display the statistics the Nexus 5000 Series switch maintains for TACACS+ activity, perform this
task:
Command
Step 1
switch# show tacacs-server statistics
{hostname|ipv4-address|ipv6-address}
For detailed information about the fields in the output from this command, see the Cisco Nexus 5000
Series Command Reference.
Verifying TACACS+ Configuration
To display TACACS+ configuration information, perform one of the following tasks:
Command
show running-config tacacs [all]
show startup-config tacacs
show tacacs-server [host-name | ipv4-address |
ipv6-address] [directed-request | groups | sorted
| statistics]
Example TACACS+ Configuration
The following example shows how to configure TACACS+:
feature tacacs+
tacacs-server key 7 "ToIkLhPpG"
tacacs-server host 10.10.2.2 key 7 "ShMoMhTl"
aaa group server tacacs+ TacServer
use-vrf management
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
1-14
server 10.10.2.2
Chapter 1
Purpose
Exits configuration mode.
(Optional) Copies the running configuration to the
startup configuration.
Purpose
Displays the TACACS+ statistics.
Purpose
Displays the TACACS+ configuration in the
running configuration.
Displays the TACACS+ configuration in the
startup configuration.
Displays all configured TACACS+ server
parameters.
Configuring TACACS+
OL-16597-01