Verifying The Status Of Encryption; Feature Information For Secure Storage - Cisco Catalyst 9200 Configuration Manual

Configuring Secure Storage
Command or Action
Step 4 write memory
Example:
Device# write memory

Verifying the Status of Encryption

Use the show parser encrypt file status command to verify the status of encryption. The following command
output indicates that the feature is available but the file is not encrypted. The file is in 'plain text' format.
Device#show parser encrypt file status
Feature: Enabled
File Format: Plain Text
Encryption Version: Ver1

Feature Information for Secure Storage

This table provides release and related information for features explained in this module.
These features are available on all releases subsequent to the one they were introduced in, unless noted
otherwise.
Release
Cisco IOS XE Fuji 16.9.2
Use Cisco Feature Navigator to find information about platform and software image support. To access Cisco
Feature Navigator, go to http://www.cisco.com/go/cfn.
Feature
Secure Storage
System Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches)
Verifying the Status of Encryption
Purpose
Decrypts the private-config file and saves the file in plane
format.
Feature Information
Secure Storage feature allows you to secure critical
configuration information by encrypting it. It
encrypts asymmetric key-pairs, pre-shared secrets,
the type 6 password encryption key and certain
credentials. An instance-unique encryption key is
stored in the hardware trust anchor to prevent it
from being compromised.
229