Repair Procedures; Introduction; Observe And Obey - Genie GTH-1056 Service And Repair Manual

Service and Repair Manual

Repair Procedures

Section 3 Repair Pr oc edures

Observe and Obey:


Repair procedures shall be completed by a
person trained and qualified on the repair of this
machine.

Immediately tag and remove from service a
damaged or malfunctioning machine.

Repair any machine damage or malfunction
before operating the machine.
Before Repairs Start:

Read, understand and obey the safety rules
and operating instructions in the appropriate
operator's manual on your machine.

Be sure that all necessary tools and parts are
available and ready for use.

Use only Genie approved replacement parts.

Read each procedure completely and adhere
to the instructions. Attempting shortcuts may
produce hazardous conditions.
16
Machine Configuration:

Unless otherwise specified, perform each
repair procedure with the machine in the
following configuration:
• Machine parked on a firm, level surface
• Boom in the stowed position
• Key switch in the off position with the key
removed
• Wheels chocked
GTH-1056
April 2017
Part No. 1278145