Engines; How To Repair The John Deere 4045T Engine; How To Repair The Perkins 1104D-E44Ta Engine; How To Repair The Deutz Td3.6 L4 And Tcd3.6 L4 Engines - Genie GTH-1056 Service And Repair Manual

April 2017
4-1

Engines

How to R epair the J ohn D eere 4045T Engine
How to Repair the John Deere
4045T Engine
Repair procedures and additional engine
information is available in the John Deere
4045HF485 Operator's Manual, John Deere 4045T
Workshop Manual, John Deere 4045T Alternator
Manual and the John Deere 4045T Fuel Systems
Manual.
John Deere 4045HF485 Operator's Manual
Genie part number
John Deere 4045T Workshop Manual
Genie part number
John Deere 4045T Alternator Manual
Genie part number
John Deere 4045T Fuel Systems Manual
Genie part number
How to R epair the Per ki ns 1104D-E44T A Engi ne
How to Repair the Perkins
1104D-E44TA Engine
Repair procedures and additional engine
information is available in the Perkins 1100
Operation and Maintenance Manual and the
Perkins 1104 Service Manual and the Perkins 1100
Troubleshooting Manual.
Perkins 1100 Operation and Maintenance Manual
Genie part number
Perkins 1104 Service Manual
Genie part number
Perkins 1100 Troubleshooting Manual
Genie part number
How to R epair the D eutz TD 3.6 L4 and TCD 3.6 L4 Engines
Part No. 1278145
How to Repair the Deutz TD3.6
L4 and TCD3.6 L4 Engine
Repair procedures and additional engine
information is available in the Deutz TCD3.6
Operation Manual and the Deutz TD3.6 L4 and
TCD3.6 L4 Workshop Manual.
Deutz TCD3.6 Operation Manual
Genie part number
Deutz TD3.6 and TCD3.6 Workshop Manual
Genie part number

How to Remove the Engine

123703
Note: When removing a hose assembly or fitting,
the O-ring (if equipped) on the fitting and/or hose
108443
end must be replaced. All connections must be
torqued to specification during installation. Refer to
Specifications, Hydraulic Hose and Fitting Torque
108502
Specifications.
All Models:
108503
1 Open the access door above the hydraulic
tank.
2 Disconnect the battery from the machine.
3 Remove the fasteners securing the engine
access cover from the rear of the machine.
123702
Remove the cover from the machine.
4 Perkins models: Open the engine access
117764
cover at the tank side of the machine. Locate
the fuel supply line where it is attached to the
123583
fuel filter/water separator.
5 Tag, disconnect and plug the fuel supply hose
at the fuel filter/water separator. Cap the fitting.
6 Locate the fuel return hose connection just
above the fuel filter/water separator.
7 Tag, disconnect and plug the fuel return hose
at the fuel filter/water separator. Cap the fitting
GTH-1056
Service and Repair Manual
Engines
Electrocution/burn hazard.
Contact with electrically charged
circuits could result in death or
serious injury. Remove all rings,
watches and other jewelry.
218707
1251788
43