Repair Procedures; Introduction - Genie Z-30/20N Service Manual

April 2016
Section 4 Repair Pr oc edures
Observe and Obey:

Repair procedures shall be completed by a
person trained and qualified on the repair of
this machine.

Immediately tag and remove from service a
damaged or malfunctioning machine.

Repair any machine damage or malfunction
before operating the machine.
Before Repairs Start:

Read, understand and obey the safety rules
and operating instructions in the appropriate
operator's manual on your machine.

Be sure that all necessary tools and parts are
available and ready for use.

Use only Genie approved replacement parts.

Read each procedure completely and adhere
to the instructions. Attempting shortcuts may
produce hazardous conditions.
Part No. 139378
Z-30/20N • Z-30/20N RJ • Z-34/22 • Z-34/22N

Repair Procedures

Machine Configuration:

Unless otherwise specified, perform each
repair procedure with the machine in the
following configuration:
• Machine parked on a firm, level surface
• Key switch in the off position with the key
removed
• The red Emergency Stop button in the off
position at both the ground and platform
controls
• Wheels chocked
• All external AC power supply disconnected
from the machine
• Boom in the stowed position
• Turntable secured with the turntable rotation
lock
Service Manual
45