How To Remove The Gauge Cluster Assembly; How To Remove The Diagnostic Display - Genie GTH-1056 Service And Repair Manual

April 2017
How to R emove the Gaug e Cluster Ass embl y
How to Remove the Gauge
Cluster Assembly
1 Disconnect the battery from the machine.
Electrocution/burn hazard.
Contact with electrically charged
circuits could result in death or
serious injury. Remove all rings,
watches and other jewelry.
2 Remove the fasteners securing the
transmission control lever to the column.
Carefully separate the lever from the column.
3 Grasp the edge of the dash cluster and pull the
cluster through the opening in the dashboard.
4 Tag and disconnect the wire harness from the
dash cluster. Remove the dash cluster from
the machine.
Part No. 1278145
Operator's Compartment
How to R emove the Diagnostic Displ ay
How to Remove the Gauge
Cluster Assembly
1 Disconnect the battery from the machine.
2 Reach under the dashboard and gently loosen
and remove the locknut securing the
diagnostic display to the dashboard. Gently
push the diagnostic display through the
opening in the dashboard.
3 Tag and disconnect the wire harness from the
diagnostic display. Remove the diagnostic
display from the machine.
GTH-1056
Service and Repair Manual
Electrocution/burn hazard.
Contact with electrically charged
circuits could result in death or
serious injury. Remove all rings,
watches and other jewelry.
41