How To Remove The Steer Orbitral; How To Remove The Joystick - Models With Single Joystick - Genie GTH-1056 Service And Repair Manual

April 2017
How to R emove the Steer Or bitral

How to Remove the Steer Orbitral

1 Remove the steering column. Refer to Repair
Procedure, How to Remove the Steering
Column.
2 Working under the dashboard, locate the
hydraulic hose at port L of the steering orbitral.
3 Follow the hydraulic hose from port L of the
steer orbitral to its connection at the front axle
of the machine. Tag, disconnect and plug the
hydraulic hose at the front axle. Cap the fitting.
4 Tag, disconnect and plug the hydraulic hoses
at ports SUP, SUR and SUT of the secondary
function manifold. Cap the fitting.
Bodily injury hazard. Spraying
hydraulic oil can penetrate and
burn skin. Loosen hydraulic
connections very slowly to allow
the oil pressure to dissipate
gradually. Do not allow oil to
squirt or spray.
5 Tag, disconnect and plug the hydraulic hose at
port SULS of the primary function manifold.
Cap the fitting.
6 Slowly move the steer orbitral away from the
dash frame while feeding all loose hoses
through the opening of the chassis.
Part No. 1278145
Operator's Compartment
How to R emove the Joystic k - Models with Si ngle Joys tic k
How to Remove the Joystick -
Models with Single Joystick
1 Disconnect the battery from the machine.
2 Tag and disconnect the joystick wire harness
from the machine.
3 Remove the fasteners securing the joystick
mount panel to the side console.
4 Tag, disconnect and plug the hoses from ports
1, 2, 3, 4, P and T of the joystick. Cap the
fittings.
Note: Removing the hydraulic hose from port T of
the joystick with the joystick below the hydraulic oil
level in the hydraulic tank will result in excessive
hydraulic fluid leaking from the hose. Do not
disconnect the hose from the port if the joystick is
below the hydraulic oil level in the hydraulic tank.
5 Remove the fasteners securing the joystick to
the mount panel. Remove the joystick.
GTH-1056
Service and Repair Manual
Electrocution/burn hazard.
Contact with electrically charged
circuits could result in death or
serious injury. Remove all rings,
watches and other jewelry.
39