Diagnostic Display - Genie GTH-1056 Service And Repair Manual

From gth1016e-11305 to gth1016e-11799 includes gth1016e-11281 gth1016e-11282 gth1016e-11286 from gth10e-11800
Hide thumbs Also See for GTH-1056:
Table of Contents

Advertisement

Service and Repair Manual

Diagnostic Display

When the engine Electronic Control Module (ECM)
detects an abnormal operating condition, a fault
code is immediately stored in the ECM memory.
The fault code is displayed on the LCD display
which is located on the gauge cluster in the
operator's compartment.
The gauge cluster also includes two warning lights.
They are an amber colored light which signals an
abnormal engine condition which should be
corrected as soon as possible and a red colored
light which signals an engine condition which
requres the operator to shut down the engine as
soon as possible.
The ECM will, in some cases, automatically shut
down the engine when the red light is displayed.
Active Fault Codes
Active Fault Codes will be displayed on the gauge
cluster whenever a fault is detected. If multiple fault
codes are detected, the fault codes will scroll on the
display.
1 FMI Code
2 SPN Code
3 amber warning light
4 red stop engine light
Active Codes vs Stored Codes
Active fault codes, indicating an engine condition or
conditions which have not been corrected, are
displayed at the moment the fault is detected.
80
Stored fault codes are the cumulative history of
fault codes which the ECM has detected. These
fault codes may be recalled by service personnel at
a later time even if the condition which caused the
engine fault has ceased to exist.
Note: Additional hardware will be necessary to
access stored codes.
Decoding Fault Codes
The Suspect Parameter Number (SPN) and the
Failure Mode Identifier (FMI), when combined, are
the basis for an engine fault code. The SPN number
indicates the affected component; the FMI number
reveals the type of failure that has occurred.
Comparing the combination of numbers to the fault
code chart on the following pages will help to
determine the exact engine fault and a corrective
course of action. For additional information, refer to
the engine operator's manual which came with your
machine.
GTH-1056
April 2017
Part No. 1278145

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents