Using The Operator Panel; Operator Panel - Kyocera Mita Ecosys FS-1010 Service Manual

2-3 Using the operator panel

This section provides explanation on how to use the printer's operator panel for basic operation.
For details, refer to the printer's User's Manual.

2-3-1 Operator panel

The printer's operation panel has the following LED indicators and keys. Note that adjustments to
the printer parameters made using these keys may be overridden by those made from within the
application software.
No. Name
1
On line indicator
2
Data indicator
3
Paper empty/
Paper jam indicator
4
Toner indicator
5
Cancel key
6
Go key
Figure 2-3-1 Operator panel
Table 2-3-1 Operator panel function
Indicates whether the printer is on-line or off-line.
Indicates that the printer is receiving data.
Indicates whether the paper cassette is empty or a paper jam has
occurred.
Flashes when toner is low, and light when toner is exhausted.
Stops printing when pressed.
• Switches the printer mode between on-line and off-line when
pressed. If you continued to press the key for 10 or more seconds,
service status page is printed.
• Switches between the MP tray and paper cassette when the paper
runs out.
• Prints out any unprinted page.
2-15
Function
1
2
3
4
5
6
FS-1010