Sketch Settings - Sony DVS-9000 System User Manual

Hide thumbs Also See for DVS-9000 System:
Table of Contents

Advertisement

Sketch Settings

Applying the Sketch effect
1
2
3
4
486
DME Special Effect Operations
In the DME menu, select VF7 'Enhanced Video Modify' and HF1
'Sketch.'
The Sketch menu appears.
Press [Sketch], turning it on.
The Sketch effect is enabled.
Select the method for applying outlines in the <Sketch Mode> group.
Sketch: Apply an effect like a sketch.
Edge Color: Enhance the outlines.
Draw: Apply an effect like a line drawing.
Relief: Apply a bas-relief effect.
Sharp: Increase the apparent sharpness.
Set the following parameters, according to the method selected in step 3.
• When Sketch is selected
Knob
Parameter
Adjustment
1
Mix
Mix amount for Sketch video and
input video
2
Clip
Reference level for outline
extraction
3
Gain
Image gain for outline extraction
4
C Gain
Chroma gain of input video
a) 100.00 gives an image completely transformed by the Sketch effect. 0.00 is the original
input image.
b) The larger the Clip value, the narrower the outline width.
• When Edge Color is selected
Knob
Parameter
Adjustment
1
Mix
Mix amount for Edge Color video
and input video
2
Clip
Reference level for outline
extraction
a) 100.00 gives an image completely transformed by the Sketch effect. 0.00 is the original
input image.
b) The larger the Clip value, the narrower the outline width.
Setting values
a)
0.00 to 100.00
b)
–100.00 to +100.00
–100.00 to +100.00
–100.00 to +100.00
Setting values
a)
0.00 to 100.00
b)
–100.00 to +100.00

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvs-9000sf system

Table of Contents