Sony DVS-9000 System User Manual page 458

Adjusting the position of art edges
1
2
458
DME Special Effect Operations
Knob Parameter Adjustment
1 Top Width of top edge
2 Left Width of left edge
3 Right Width of right edge
4 Bottom Width of bottom edge
5 Density Density of edges
In the Art Edge menu, press [Edge Position], turning it on.
Adjust the following parameters.
The valid ranges of the parameter values depend on the aspect ratio (4:3/
16:9) selected in the system, as follows.
• 4:3 mode
Knob Parameter Adjustment
1 Top Position of top edge
2 Left Position of left edge
3 Right Position of right edge
4 Bottom Position of bottom edge
5 All Adjust the position of all four
edges
• 16:9 mode
Knob Parameter Adjustment
1 Top Position of top edge
2 Left Position of left edge
3 Right Position of right edge
4 Bottom Position of bottom edge
5 All Adjust the position of all four
edges
Parameter group [2/2]
Setting values
0.00 to 4.50
0.00 to 8.00
0.00 to 8.00
0.00 to 4.50
0.00 to 100.00
Setting values
–3.00 to +3.00
–4.00 to +4.00
–4.00 to +4.00
–3.00 to +3.00
Value of H shown
Setting values
–2.25 to +2.25
–4.00 to +4.00
–4.00 to +4.00
–2.25 to +2.25
Value of H shown