Making A Link Setting For Key Transition - Sony DVS-9000 System User Manual

2
Using any of the following methods, select the link number you want to
set.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob
1
3
In the <M/E Select> group, select [Master M/E] (link source).
4
Using any of the following methods, select the M/E or PGM/PST bank you
want to be the link source, then press [M/E Set].
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob
2
a) 1: M/E-1
2: M/E-2
3: M/E-3
4: PGM/PST
5
In the <M/E Select> group, select [Linked M/E] (link destination).
6
In the same way as in step 4, select the M/E or PGM/PST bank you want
to be the link destination, then press [M/E Set].
To link the banks not only for transition execution but also for the
other operations
Press [Transition Only], turning it off.
To release the link setting
Use the same operation as in step 2 to select the link number for which you
want to release the link setting, then press [Clear].

Making a Link Setting for Key Transition

You can make a link setting for key transition by using the Switcher >Link
>Key Transition Link menu.
The operations for which you can link two banks are the following independent
key transition operations.
Parameter Adjustment
Link No Link number selection
Parameter Adjustment
No Bank selection
Setting values
1 to 8
Setting values
1 to 4
Settings Relating to Function Links (Link Menu)
a)
967