Sony DVS-9000 System User Manual page 457

This enables art edges, and you can now use the knobs to adjust the
parameters.
Note
The Defocus, Blur, Key Border, and Glow effects cannot be applied to the
Art Edge sections.
3
Set the parameters.
The valid ranges of the parameter values depend on the aspect ratio (4:3/
16:9) selected in the system, as follows.
• 4:3 mode
Knob Parameter
1 H
2 V
3 All
5 Density
Knob Parameter
1 Top
2 Left
3 Right
4 Bottom
5 Density
• 16:9 mode
Knob Parameter
1 H
2 V
3 All
5 Density
Parameter group [1/2]
Adjustment
Simultaneously adjust width of left
and right edges
Simultaneously adjust width of top
and bottom edges
Simultaneously adjust width of all
four edges
Density of edges
Parameter group [2/2]
Adjustment
Width of top edge
Width of left edge
Width of right edge
Width of bottom edge
Density of edges
Parameter group [1/2]
Adjustment
Simultaneously adjust width of left
and right edges
Simultaneously adjust width of top
and bottom edges
Simultaneously adjust width of all
four edges
Density of edges
Setting values
Value of Left shown
Value of Top shown
Value of Left shown
0.00 to 100.00
Setting values
0.00 to 6.00
0.00 to 8.00
0.00 to 8.00
0.00 to 6.00
0.00 to 100.00
Setting values
Value of Left shown
Value of Top shown
Value of Left shown
0.00 to 100.00
DME Special Effect Operations
457