Specifying The Region And Edit Points; Selecting The Region In Which Editing Applies - Sony DVS-9000 System User Manual

Specifying the Region and Edit Points

Selecting the Region in Which Editing Applies

Selecting by control panel
Select the region in which the editing is applied by the effect consisting of
keyframes, using the region selection buttons in the numeric keypad control
block. (See step 2 (page 639) in "Recalling a Register.")
Selecting by menus
This is convenient for selecting some of the regions assigned to the numeric
keypad control block or changing the reference region.
Note
The function of region selection buttons in the numeric keypad control block
is linked to the menu. If you carry out region selection by pressing a region
selection button, then all the regions assigned to that button are selected.
1
642
Specifying the Region and Edit Points
In the Key Frame menu, press HF7 'Region Select.'
The Key Frame >Region Select menu appears.
On the left of the status area, region selection buttons appear.
Depending on the region selection state, the following indications appear.
Green text: the assigned regions include the reference region.
Orange text: one of the assigned regions is selected.
White text: no assigned region is selected.
When any one or more of the regions assigned to the region selection
buttons is not selected, a red bar appears within the button indication. The
[STORE] and [RCALL] buttons in the numeric keypad control block flash
amber.