Misc Menu Operations; Port Settings For Control From An External Device - Sony DVS-9000 System User Manual

Hide thumbs Also See for DVS-9000 System:

Table of Contents

Misc Menu Operations

In the Misc menu, you can carry out the following operations.

• Enabling and disabling operation from an external device, System Manager,

• Switching the safe title function on or off for each switcher output.

• Displaying the transition rate, independent key transition rate, and fade-to-

Enabling or disabling control from an external device

or an editing keyboard.

black transition rate for each of the M/E and PGM/PST banks, and changing

the settings.

In the menu control block, press the top menu selection button [MISC],

then select VF1 'Enable' and HF1 'Port Enable.'

The Misc >Enable >Port Enable menu appears with the status area

showing the settings of the following ports.

• Switcher Remote 1 to Remote 4 ports (RS-422A, D-sub 9-pin)

• Switcher GPI port (parallel, 25-pin)

• DME1/DME2 Editor ports (RS-422A, D-sub 9-pin)

• DME1/DME2 GPI ports (parallel, 25-pin)

In the <Switcher> or <DME> group, press on the name of the port for

which you want to disable control from an external device, turning it off.

To re-enable control for the port, press on its name once more.

• It is not necessary to make any settings for DME2.

• For the AUX bus operation from the Remote1 to Remote4 ports of the

switcher, the setting (Enable/Disable/Manual) in the Setup menu takes

precedence. Only when the setting is "Manual," the settings made in the

Port Enable menu apply.

For details, see "Interfacing With External Devices (Device Interface

Menu)" in Chapter 19 (Volume 3).

Dvs-9000sf system