Lighting Settings - Sony DVS-9000 System User Manual

Character Trail settings
You can set the effect starting position, the degree of expansion, the slant angle
of the effect region, and trail direction, the degree to which the image
disappears, the trail type and amount of stardust, and other parameters.
To apply the Character Trail effect
With the Character Trail menu displayed, set the following parameters.
Knob
1
2
3
4
To make the tip of the swirl stardust
1
2

Lighting Settings

You can specify the intensity and color of the light and the lighting pattern. The
following lighting patterns are available:
Plane: Illumination of the entire screen.
Bar: Bar illumination. You can specify the width and angle of the bar, and its
Preset: Lighting pattern suitable for nonlinear effects.
When Bar is selected, the following modes can be selected.
Normal: Emphasizes the bar highlight area.
Specular: An effect like light striking a surface with metallic reflections.
522
DME Special Effect Operations
Knob Parameter Adjustment
2 Random Degree to which pixel positions
become more randomized
further from the center
Parameter Adjustment
Transition Position where effect starts
Expand Degree of expansion
Trans Angle Angle of slanting in effect region
Trail Angle Direction of trail
Press [Pixel], turning it on.
Set the following parameters.
Knob Parameter Adjustment
1 Density Degree to which image disappears 0.00 to 100.00
2 Random Trail type and amount of stardust
softness.
Setting values
0.00 to 100.00
Setting values
–8.000 to +8.000
0.00 to 100.00
–8.000 to +8.000
–100.00 to +100.00
Setting values
0.00 to 100.00