Sony DVS-9000 System User Manual page 548

6
To set a test sphere
1
2
To select the lighted area
In the <Area Select> group, select one of the following.
FRGD: The light strikes the image foreground.
BKGD: The light strikes the image background.
Both: The light strikes both foreground and background.
For more information about the lighted area, see "Selecting the lighted area"
(page 540).
548
DME Special Effect Operations
When you selected Line
Knob Parameter Adjustment
1 X Movement in X-axis direction
2 Y Movement in Y-axis direction
3 Z Movement in Z-axis direction
4 Longitude Longitude
a) Minus moves left, plus moves right.
b) Minus moves down, plus moves up.
c) Minus moves forward, plus moves deeper.
d) Minus moves counterclockwise, plus moves clockwise.
In the <Axis Select> group, select the coordinate space in which to place
the light source.
Source: Place the light source in the source coordinate space. The
spotlight moves when the image moves.
Target: Place the light source in the target coordinate space. The spotlight
does not move, even when the image moves.
For details of the coordinate space in which to place the light source, see
"Linking and unlinking image and spotlight" (page 540).
In the Light 1 menu, press [Test Sphere], turning it on.
A test sphere effect appears on the surface of the image.
Adjust the following parameter.
Knob Parameter Adjustment
5 Amp Distance of light
a) Light appears from Z direction. At –100.00 the light goes deepest, at +100.00 the whole
image is lit like a flat effect.
Setting values
a)
–6.00 to +6.00
b)
–6.00 to +6.00
c)
–6.00 to +6.00
d)
–8.00 to +8.00
Setting values
a)
–100.00 to +100.00