Pattern Limit - Sony DVS-9000 System User Manual

4
To enter a difference from the current value
After pressing the [+/–] button, enter the difference and press the [TRIM]
button.
To change the sign (+ or –), press the [+/–] button.
Setting the transition rate by a menu operation
1
2
3
Displaying the transition rates in a menu and changing the
settings
For each of the M/E and PGM/PST banks, you can display the transition rate
and independent key transition rate, and change the settings.
For more details, see "Displaying a List of Transition Rates and Changing the
Settings" (page 327).

Pattern Limit

When a wipe or DME wipe pattern is selected for the transition, you can
specify the range of movement of the wipe pattern through the course of the
transition, for each bank independently.
When the pattern limit function is enabled, carrying out a transition results in
the following effect for example settings.
130
Executing a Transition
• To clear the entry, press the [CLR] button.
Press the [ENTER] button.
This confirms the entry, and the selected region name and the set transition
rate appear in the numeric keypad control block display.
The transition control block display of the same bank (M/E or PGM/PST)
also shows the setting.
In the switcher bank, select first VF7 'Misc', then HF1 'Transition.'
The Transition menu appears.
Select any transition type in the <Transition Type> group.
Turn the knob to set the transition rate.
Knob Parameter
1 Transition Rate
Adjustment Setting values
Transition Rate 0 to 999 (frame count)