3
4
202
Basic Procedure for Wipe Settings
Press the button to select the desired pattern.
The parameters change according to the selected pattern, and you can
adjust the pattern.
• When a polygon wipe is selected (pattern number 49)
Knob
Parameter
Adjustment
1
No
Number of points
2
Star Rate
Angularity of star
a) A value of –100.00 completely removes the star "rays," leaving a circle; at +100.00 the
"rays" are at their sharpest.
• When a mosaic wipe is selected (pattern numbers 200 to 203, 206 to
213, 224 to 247, 250 to 257, 260 to 269)
Knob
Parameter
Adjustment
1
H Tile No
Number of tiles horizontally
2
V Tile No
Number of tiles vertically
• When a karaoke wipe is selected (pattern numbers 220 to 223)
Knob
Parameter
Adjustment
1
Start
Position of start tile
2
Row No
Number of rows of tiles
3
Phase
Delay for next row
a) At –100.00 tiles appear from the top (or left edge) of the screen; at +100.00 from the
bottom (or right edge) of the screen.
b) At –100.00 all rows appear simultaneously; at +100.00 until one row of tiles is completely
displayed, the next row does not start to appear.
• When a random wipe is selected (pattern number 273)
Knob
Parameter
Adjustment
1
H Size
Tile width
2
V Size
Tile height
3
Volatility
Rate of tile generation
• When a diamond dust wipe is selected (pattern number 274)
Knob
Parameter
Adjustment
1
H Size
Particle width
2
V Size
Particle height
3
Flash Rate
Rate of generation of particles
Setting values
3 to 64
a)
–100.00 to +100.00
Setting values
2 to 36
2 to 18
Setting values
a)
–100.00 to +100.00
1 to 36
b)
–100.00 to +100.00
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00