Sony DVS-9000 System User Manual page 915

When Utility Command is selected: A list of commands appears on the
right of the status area; using any of the following methods, select the
command you want to assign.
• Press directly on the list.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob
3
a)
4
a) When the Command parameter is set to Sw'er GPI Test Fire, Panel GPI Test Fire, DCU
GPI, or Test Fire
When Macro Recall is selected: Turn the knob to select the macro
register you want to assign.
Knob
3
When Shotbox Recall is selected: Turn the knob to select the shotbox
register you want to assign.
Knob
3
5
Press [Action Set].
This assigns the selected action, which is reflected in the status area.
In the utility/shotbox control block, the assigned button lights orange.
If a shotbox register was assigned, the register name appears.
To cancel an assignment
After selecting the relevant button, press [Clear].
List of utility commands and memory recall button status
The following table shows the utility commands that can be assigned to
memory recall buttons.
a) Function
Command name
SWR Remote1 Enbl Switcher Remote 1 enabled/disabled
|
SWR Remote4 Enbl Switcher Remote 4 enabled/disabled
DME1 Editor Port Enbl DME1 editor port enabled/disabled
DME2 Editor Port Enbl DME2 editor port enabled/disabled
Parameter Adjustment
Command Utility command selection
GPI No GPI port number
Parameter Adjustment
Macro Macro register selection
Parameter Adjustment
Shotbox Shotbox register selection
|
Setting values
1 and upwards
1 and upwards
Setting values
1 to 99
Setting values
1 to 99
Button status
Lit green
Enabled
Enabled
Enabled
Setting Button Assignments (Prefs/Utility Menu)
Lit orange
Disabled
Disabled
Disabled
915