Sony DVS-9000 System User Manual page 56

To move the edit point to the specified
timecode position, hold down the
[SHIFT] button in the device control
block, then press this button, turning it
on, and enter the desired numeric value
from the numeric keypad control block.
During macro editing, pressing this
button moves the edit point to the event
number specified by numeric entry
with the numeric keypad control block.
PREV KF (previous keyframe): When
this button is pressed, the edit point
moves to the keyframe immediately
before the current time (the position
where the effect is currently stopped).
During macro editing, pressing this
button moves the edit point to the event
immediately before the current event.
NEXT KF (next keyframe): When this
button is pressed, the edit point moves
to the keyframe immediately after the
current time.
During macro editing, pressing this
button moves the edit point to the event
immediately after the current event.
c Editing buttons
FROM TO: Press this button, turning it on,
to enter numeric values from the
numeric keypad control block, and
select a specified range of keyframes
(during macro editing, the specified
range of events).
INS (insert): When this button is pressed, a
new keyframe is inserted after the
current keyframe. Pressing this button
while holding down the [SHIFT]
button in the device control block
inserts a new keyframe before the
current keyframe.
During macro editing, pressing this
button moves the edit point to the event
immediately after the current event.
MOD (modify): When this button is
pressed, the selected keyframe is
modified with the values of the current
56
Names and Functions of Parts of the Control Panel
keyframe. When the edit point is
between two keyframes, the
immediately preceding keyframe is
modified. You can also select multiple
keyframes, and modify them in a single
operation. At this time, pressing this
button while holding down the
[SHIFT] button in the device control
block modifies all selected keyframes
with the changed values taken as
relative values.
During macro editing, pressing this
button amends the selected event.
DEL (delete): When this button is pressed,
the selected keyframe is deleted. When
the edit point is between two
keyframes, the immediately preceding
keyframe is deleted. During macro
editing, pressing this button deletes the
selected event. You can also select
multiple keyframes or macro events,
and delete them in a single operation.
COPY: When this button is pressed, the
selected keyframe (during macro
editing, macro event) is copied. You
can also select multiple keyframes or
macro events, and copy them in a
single operation.
PASTE: When this button is pressed, the
deleted or copied keyframe (during
macro editing, macro event) is inserted
after the current keyframe (during
macro editing, macro event). Pressing
this button while holding down the
[SHIFT] button in the device control
block inserts the deleted or copied
keyframe (during macro editing, macro
event) before the current keyframe
(during macro editing, macro event).
UNDO: When this button is pressed, the
last executed keyframe (during macro
editing, macro event) insertion,
modification, or deletion, or paste
operation is canceled.