Signal Name Display - Sony DVS-9000 System User Manual

For details of the setting, see "Cross-Point Settings (Xpt Assign menu)" in
Chapter 19 (Volume 3).
Notes
• For details of audio mixers that can be connected, contact your Sony service
• When the signal is switched with a snapshot, keyframe, and so on, the audio
• When bus fixed mode is selected in setup (see page 136), the audio mixer

Signal Name Display

You can attach a name (source name) to each signal assigned to a cross-point
button, with a maximum of 16 characters.
• The source name displays in the cross-point control block and auxiliary bus
• To display the source names for shifted numbers (13 to 24 or 12 to 22), press
• To display the source names of the key signals assigned to button numbers,
Colors of lit cross-point buttons
In a particular row of cross-point buttons, only the last pressed button is
effective, and lights amber or red. The amber indicates the "low tally" state,
and the red indicates the "high tally" state, to indicate whether or not the
selected signal appears in the final output video.
Color
Amber
Red
110
Signal Selection
or sales representative.
mixer is not linked.
program output is linked to the bus output as the background.
control block show the source names of the video signals assigned to
numbers 1 to 12 (or 11).
the [SHIFT] button to the right of the key row delegation buttons.
hold down one of the key delegation buttons [KEY1] to [KEY4] or [DSK1]
to [DSK4] buttons or, for the auxiliary bus control block, hold down the
[KEY] button.
Significance of colors of lit cross-point buttons
State
Low tally
High tally
Significance
Does not appear in final output video
Appears in final output video