Sony DVS-9000 System User Manual page 477

The Defocus/Blur menu appears.
2
Press [Defocus], turning it on.
The Defocus effect is enabled. You can adjust the defocusing of video and
key signals with the knobs.
Note
On the MVE-8000A, the Defocus and Glow effects cannot be enabled at
the same time. The effect which was turned on most recently is enabled.
3
In the <Defocus Mode> group, select the signal to which to apply the
defocus effect.
Video/Key: Video signal and key signal
Video: Video signal only
Key: Key signal only
Note
"Key" can be selected only when the MVE-8000A/MVE-9000 is
connected through an SDI interface.
4
Set the parameters.
• When Video/Key is selected (with DME dedicated interface)
Knob Parameter
1 H
2 V
3 All
• When Video/Key is selected (with SDI-interfaced MVE-8000A/
MVE-9000)
Knob Parameter
1 V/K H
2 V/K V
3 V/K All
Adjustment
Horizontal defocusing of video
and key signals
Vertical defocusing of video and
key signals
Horizontal and vertical
defocusing of video and key
signals
Parameter group [1/2]
Adjustment
Horizontal defocusing of video
and key signals
Vertical defocusing of video and
key signals
Horizontal and vertical
defocusing of video and key
signals
Setting values
0.00 to 100.00
0.00 to 100.00
H value shown
Setting values
Video H value shown
Video V value shown
Video H value shown
DME Special Effect Operations
477