Setting The Aux Bus Output And Reentry Input - Sony DVS-9000 System User Manual

Hide thumbs Also See for DVS-9000 System:

Table of Contents

Setting the AUX Bus Output and Reentry Input

Select the signal input to the DME (AUX bus output) and the signal returned

as the switcher primary input (reentry input) as follows.

Before the following operations, carry out the procedure described in the

previous item "Setting the Interface Between the DME and the Switcher."

Interfacing With External Devices (Device Interface Menu)

To select the number of keys that use DME on an M/E bank, make one of

the following selections in the <DME Assigned Key per M/E> group.

This setting is disabled for the CCP-9000/9000A.

Up to 2 Keys: Mode in which a processed key operation is carried out only

with the dedicated interface DME or the SDI interface DME.

Up to 3 Keys: Mode in which two processed key operations with the

dedicated interface DME and the SDI interface DME are both possible

simultaneously on the same M/E. When this mode is selected, when

combined by a processed key with the SDI interface DME, select the

material for the second channel not on the DME external video bus,

but on the AUX bus.

In the Switcher >Device Interface menu, press [DME Type Setting].

The DME Type Setting menu appears.

Press [DME SDI Interface].

The DME SDI Interface menu appears.

Using any of the following methods, select the DME channel to which

operations apply.

• Press directly on the list on the left of the status area.

• Press the arrow keys to scroll the reverse video cursor.

• Turn the knob.

DME channel selection

Setting values

Dvs-9000sf system