Sony DVS-9000 System User Manual page 216

Hide thumbs Also See for DVS-9000 System:

Table of Contents

Rotating the wipe pattern (Rotation)

You can rotate the pattern. There are three rotation modes, as follows.

This carries out a wipe with the pattern in a fixed angle.

The parameter Angle determines the angle of pattern rotation.

A value of –100.00 of the parameter Angle corresponds to one whole turn

counterclockwise; a value of +100.00 corresponds to one whole turn

With a value of 0.00 there is no rotation.

Through the course of the transition the wipe pattern rotates at a fixed specified

The parameter Speed determines the speed of pattern rotation.

A value of –100.00 of the parameter Speed corresponds to one turn per second

counterclockwise; a value of +100.00 corresponds to one turn per second

clockwise. With a value of 0.00 the pattern is stationary.

Basic Procedure for Wipe Settings

Move the trackball or joystick, to set the wipe position. By pressing the [X]

button, turning it on, you can restrict movement to the horizontal direction,

and by pressing the [Y] button, turning it on, you can restrict movement to

the vertical direction.

Dvs-9000sf system