Setting the color of the shade in the shade area
1
2
Setting the bar mode of the highlight area
When you select [Bar] in step 3 of "Applying the Lighting effect" (see page
523), use the following procedure to set the bar mode of the highlight area.
Note
The bar mode of the highlight area is not supported on the MVE-8000A.
1
2
3
526
DME Special Effect Operations
Knob
Parameter
1
X
4
Width
5
Soft
Turn [Shade Color] on.
Adjust the following parameters.
Knob
Parameter
1
Luminance
2
Saturation
3
Hue
Select the mode in the <Bar Light Mode> group.
Normal: Emphasizes the bar highlight area.
Specular: An effect like light striking a surface with metallic reflections.
Mat: An effect like light striking paper, cloth, or another diffusively
reflective surface.
Set the following parameters.
Knob
Parameter
Adjustment
1
Intensity
Intensity of diffuse light area
2
Offset
Offset of center of diffuse light
area
3
Width
Width of diffuse light area
4
Soft
Softness of diffuse light area
When you select Normal or Mat in step 1, press [Bar Diffuse Color],
turning it on, and adjust the following parameters to set the color of the
diffuse light area.
Adjustment
X-value of bar center point
Width of bar
Softness of edges
Adjustment
Luminance
Saturation
Hue
Setting values
–8.00 to +8.00
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
Setting values
0.00 to 100.00
–4.00 to +4.00
0.00 to 100.00
0.00 to 100.00