Application > Control - Printronix t8000 Administrator's Manual

Application > Control
This function allows you to activate any IGP emulation listed in the menu.
The IGP emulation can be changed with this menu or by host command if
the current Active IGP emulation supports it.
PGL
VGL
ZGL *
TGL *
IGL *
STGL *
DGL *
IEGL *
MGL *
CGL *
Factory Default
IMPORTANT
NOTE:
For those emulations marked with an asterisk (*), the menus are described in detail in their
respective Refer to the Programmer's Reference Manual and not outlined in this manual.
108
Application > Control > Active IGP Emul
Printronix Graphics Language.
Emulates the QMS Code-V protocol.
Emulates the Zebra ZPL protocol.
Emulates the Toshiba TEC protocol.
Emulates the Intermec IPL protocol.
Emulates the Sato SPL protocol.
Emulates the Datamax DPL protocol.
Emulates the IER IER-520 protocol.
Emulates the Monarch MPCL II protocol.
Available upon special request only.
PGL
This menu and the Emulations shown above are
NOT available when System > Control > Program
Select is set to PS/PDF.