Printronix t8000 Administrator's Manual page 94

Determines how the audible alarm will be used when a fault occurs.
On
Cont. Beep
Off
Factory Default
Determines if distances in the MEDIA section are displayed in inches or
millimeters.
In Inches
In Millimeters
Factory Default
Displays the number of pages remaining to be printed in a print job on the
ONLINE screen message area. This feature is supported in PGL and ZGL
only.
Disable
Enable
Factory Default
PGL Syntax
ZGL Syntax
WARNING
IMPORTANT
94
System > Control > Alarm
An audible alarm sounds (3 beeps) when a fault
occurs, such as a paper jam.
A continuous audible alarm sounds when a fault
occurs, which can be stopped by pressing PAUSE.
No audible alarm sounds.
On
System > Control > Media Units
Inches are used.
Millimeters are used.
In Inches
System > Control > Batch Counter
Remaining pages is not displayed.
The number of remaining pages is displayed.
Disable
~EXECUTE;formname;[;FC][;ICNTn][;FCNTn]
^PQ(#Pages)
If the correct execute command is absent from the
print file, "0 Pages" will continually display on the
control panel.
This menu is NOT available when System >
Control > Program Select is set to PS/PDF.